SCALP ANTI-SALTPETER – Preventive treatment against saltpeter
SCALP ANTI-SALTPETER is a ready-to-use solution designed to prevent the formation of saltpeter on plaster, concrete and cement surfaces. This product penetrates deep into the substrate, hardens it and provides long-lasting protection against moisture and bacteria that cause saltpeter.
Benefits :
- 3-in-1 action : Water-repellent, hardening and bactericidal.
- Ready to use : Easy to apply with a roller, brush or sprayer.
- Transparent finish : Can remain visible or be covered with paint or wallpaper.
- Water-based : Environmentally friendly and surface friendly.
Instructions for use:
- Clean the surface by removing old paint or wallpaper, then brush to remove traces of saltpeter.
- Apply SCALP ANTI-SALTPETER in two coats 15 minutes apart.
- Wait 48 hours before applying a coating. If traces reappear, repeat the application.
Features :
- Yield : 150 to 250 g/m².
- Application temperature : Between 5°C and 50°C.
- Available packaging : 1L, 5L, 20L.
- Cleaning tools : With water after use.
Precautions:
Wear gloves and avoid contact with skin and eyes. Do not apply below 5°C and protect surrounding surfaces.
Packaging
1 Ltr
Color
incolore
Coverage
Theoretical yield per litre per coat. On a non-absorbent or fine-grained substrate.
Expect lower yields on dry wood, coarse plaster or porous surfaces.
To calculate the surface area of a wall:
Width x Height = surface to be painted .
" Surface area to be painted " divided by the paint yield = quantity of paint needed per coat.
Example for a wall panel:
Width = 4.50m
Height = 2.40m
Paint coverage = 6m²/liter
4.5 x 2.4 = 10.8m² / 6 = 1.8 liters per coat (round up to 2 liters)
Example for woodwork:
3 doors with frames. Allow 2m2 per side.
Paint coverage: 14m²/liter
6 x 2m² = 12m² / 14 = 0.85 liters per coat (rounded to 1 liter)
- 150-300ml/m2
Dilution
- Ready to use
Please sign in so that we can notify you about a reply